Skip to main content

### Rolls-Royce Hyperion A unique roadster [оценили]( at 9.8 million dollars.
Rolls-Royce The car was ordered by Rolls-Royce collector Roland Hall more than a decade and a half ago. It was built on the basis of the Drophead Coupe. The source of inspiration for the authors was the huge coupes of the early twentieth century.
Rolls-Royce The A-pillars and seats are moved 40 centimeters closer to the rear, there is no second row of seats, and there is a special compartment in front of the windshield for sporting shotguns. The body panels are carbon fiber, the inside doors are trimmed with wood.
Rolls-Royce The stock 6.75-liter V12 produces 453 horsepower and 720 Nm, allowing it to reach 60 mph (96.6 km/h) in 5.6 seconds and reach 250 kilometers per hour.
Rolls-Royce ### Lotec C1000 Unique hypercar in 1990 [заказал]( to German engineers by a certain oil tycoon from the UAE.
Lotec Work on the project was completed in 1995. The car has a carbon fiber monocoque and body parts.
Lotec The car weighed 1080 kilograms, and the 5.6-liter supercharged V8 from Mercedes-Benz produced a thousand horsepower. A Hewland racing five-speed sequential gearbox sent power to the rear axle.
Lotec According to the calculations of the creators, the coupe could reach 431 kilometers per hour, but they did not check this. The new hypercar at one time cost the buyer $3.4 million.
Lotec ### Bentley Continental GT3 Pikes Peak Coupe for the famous “race to the clouds” [оснастили]( the largest rear wing in the history of the company.
Bentley The base was the ring version of the GT3. The output of the four-liter V8 biturbo engine, which uses racing biofuel, exceeded 760 horsepower and 1000 Nm.
Bentley The engine was equipped with different pistons, connecting rods and larger compressors. The carbon fiber intake manifold is reinforced, and the exhaust manifold is made from heat-resistant Inconel by Akrapovič.
Bentley During pre-sale preparation, the car was disassembled down to the screw and all components were restored.
Bentley ### Zastrow RS0 De Tomaso Pantera GT5 In Belgium [продаётся]( a unique car, built in the 80s and preserved in an authentic form.
Zastrow The Italian sports car was modified by the German tuner Zastrow. The car received a developed body kit and interior upholstery in tobacco-colored leather.
Zastrow The power unit is borrowed from the standard version of the De Tomaso Pantera GT5. The 5.8-liter Ford Cleveland V8 engine is combined with a five-speed ZF manual transmission. It produces stock 350 horsepower and 452 Nm.
Zastrow The original accelerated to one hundred in 5.4 seconds and reached 273 kilometers per hour. This specimen has traveled approximately 28 thousand kilometers in its life.
Zastrow ### Bugatti Chiron Profile The latest Chiron [стал]( the most expensive new car that went under the hammer.
Bugatti They paid 9,792,500 euros for the coupe, although it was previously estimated at 4.2–5.5 million. The car also turned out to be the only hypercar in the recent history of the manufacturer to receive a fixed spoiler and woven leather interior trim.
Bugatti The body is painted in a special Argent Atlantique color scheme, and Bleu Royal is used for the carbon fiber underneath. Wheels in Le Patron shade are also made to special order.
Bugatti The eight-liter W16 with four compressors develops 1,500 horsepower and 1,600 Nm, and is combined with a seven-speed automatic transmission. The car accelerates to the first hundred in 2.3 seconds, to the second in 5.5. It can reach 380 kilometers per hour.
Bugatti ### Koenigsegg CCGT A unique supercar, created for racing, but never participated in it, [ушёл с молотка]( for £3,319,000.
Bonhams The CCR-based model was developed simultaneously with the CCX. It complied with the GT1 competition regulations, but just a few months after the first test runs, new regulations came into force.
Bonhams They banned the use of carbon fiber monocoques and obliged automakers to assemble not 20, but at least 350 road-going examples. For the Swedish company, this circulation was prohibitive, so the project was abandoned.
Bonhams The car, with a body made of carbon fiber and Kevlar, weighs one ton. The five-liter naturally aspirated V8 produces 600 horsepower and is mated to a Cima magnesium sequential gearbox. The vehicle’s air resistance coefficient is only 0.297. Ground clearance is 50 millimeters.

Cars created in one copy appear regularly. These can be pre-production samples, unparalleled sports cars or exclusive cars created for selected clients. However, such models are quite rarely found on open sale. Upon completion of testing, prototypes, at best, end up in factory museums, at worst, in a landfill or under pressure. Collectors also rarely part with projects built to special orders. When one-of-a-kind cars end up at auctions or in dealerships, it becomes an event.

Leave a Reply